○ High collection efficiency and extremely low cross contamination
○ Automated sampling procedure
○ SEM-ready samples (no more stub preparation)
○ 1 year warranty
○ Collect UPW Nano Particles In One Spot
○ Collects 5 nm and above
○ Bacteria, organics, colloidal silica, resin beads are extracted and collected
○ Collects particles in a << 1mm spot
○ Actionable insight in hours, not weeks
○ [SH]: bullets added to be consistent with the website.
|
|
KFMT/ Nano Spotlight System Model 9410 |
|---|---|
| Particle size range | 5 nm -2.5 μm |
| Collection efficiency | >95% |
| Aerosol concentration | Up to 104 partricles/cm3 |
| Condensing fluids | Water, distilled or cleaner |
| Wick material | DVPP00010 Durapore Membrane Filter (Millipore) formed into a 30 cm long (6.35 mm OD × 4.8 mm ID) roll |
| Inlet/Sample flow rate | 1.0 L/min |
| Sampled aerosol conditions | Sampled aerosol conditions |
| Sequential sampling onto SEM sample platen | 5 mounting holes for SEM stubs (plus a home set up well), mounting plate made of PEEK polymer with Stainless Steel 304 bottom heating plugs. Other materials and configurations are possible. |
| SEM stub dimensions | Accepts round SEM stubs – 25.4 mm (1 inch) stub main diameter maximum, 3.2 mm mounting pin diameter maximum, 9 mm mounting pin length maximum |
| Sequential sample time | User-selectable timed-sample on each stub from 1 minute to 24 hours |
| Dry deposition area | Approximately 0.5 mm diam |
| Communications | USB communications output for sampling parameters and instrument status |
| Environmental operating conditions | 15 – 30°C, 10 – 95% RH |
| Sample inlet | 6 mm OD SS tube |
| Power | Universal 100 - 230 VAC 50/60 Hz, 140 W max |
| Dimensions(W × D × H) | 305 mm (12 in.) × 255 mm (10 in.) × 500 mm (19.5 in.) |
| Weight | Growth Tube Unit: 6.8 kg (15 lb), Sequential SEM Collector module: 1.1 kg (2.5 lb) |
